"Set Color mode" seems to be missing in Add a new task

#1

Hi, In hubitat Webcore “Set Color mode” for device seems to be missing in Add a new task for a piston.

So I can get the color mode from a device and assign it to a variable.

32%20PM
Screen Shot 2021-01-23 at 10.43.32 PM.png1586×1002 62.6 KB

But then I cannot assign color mode to another device that supports it, as the command is not there.
11%20PM
Screen Shot 2021-01-23 at 10.44.11 PM.png1536×1062 101 KB

8cc08978c6ea9708d90cb8faee8f5d5e22750437_2_1380x828
8cc08978c6ea9708d90cb8faee8f5d5e22750437_2_1380x828.png1380×828 75.5 KB
42c59f88bda9af3a8b1a051758059c21c397be4a_2_462x1000
42c59f88bda9af3a8b1a051758059c21c397be4a_2_462x1000.jpg462×1000 149 KB
cbf3e27a6f6e56255e7be12de1af4ca6d60b2170_2_462x1000
cbf3e27a6f6e56255e7be12de1af4ca6d60b2170_2_462x1000.jpg462×1000 61.9 KB
b7f4f8efd1f7f1edcb4af9459f24e59a6c1e7544_2_462x1000
b7f4f8efd1f7f1edcb4af9459f24e59a6c1e7544_2_462x1000.jpg462×1000 61.4 KB

08%20AM
Screen Shot 2021-01-24 at 9.14.08 AM.png874×770 46.6 KB

#2

Please show the commands for the device. You have left them out of what you shared.

#3

If it is like SmartThings the Color Mode is a read only attribute.