1) Give a description of the problem
I have a dogfood reminder piston. Motion sensor in the kitchen triggers a voice alert to Sonos to feed the dog unless the dogfood cupboard has been opened. The problem is that it often fires to say feed the dog when the cupboard has already been opened. I have tried to figure out why the dogfood cupboard sensor is so unreliable. I replaced the battery in the contact sensor recently with a brand new one hoping that would fix it. But no luck. I created a piston to just set the variable when the contact is open and it is unreliable.
2) What is the expected behaviour?
It should set the variable when the cupboard door is opened.
3) What is happening/not happening?
It does not fire reliably when the cupboard door is opened.
**4) Post a Green Snapshot of the piston![image|45x37]
5) Attach logs after turning logging level to Full
7/15/2019, 11:12:05 AM +148ms
+0ms ╔Received event [Home].test = 1563214325146 with a delay of 1ms
+126ms ║RunTime Analysis CS > 22ms > PS > 82ms > PE > 22ms > CE
+128ms ║Runtime (37579 bytes) successfully initialized in 82ms (v0.3.108.20180906) (126ms)
+129ms ║╔Execution stage started
+144ms ║║Condition #2 evaluated false (7ms)
+145ms ║║Condition group #1 evaluated false (state did not change) (10ms)
+150ms ║╚Execution stage complete. (20ms)
+151ms ╚Event processed successfully (151ms)
7/15/2019, 11:08:35 AM +171ms
+1ms ╔Received event [Home].test = 1563214115168 with a delay of 3ms
+150ms ║RunTime Analysis CS > 25ms > PS > 105ms > PE > 19ms > CE
+153ms ║Runtime (37581 bytes) successfully initialized in 105ms (v0.3.108.20180906) (149ms)
+154ms ║╔Execution stage started
+169ms ║║Condition #2 evaluated false (7ms)
+170ms ║║Condition group #1 evaluated false (state did not change) (10ms)
+175ms ║╚Execution stage complete. (22ms)
+176ms ╚Event processed successfully (176ms)