Smart Sprinkler and Webcore

#1

1) Give a description of the problem
I am using the old Smart Sprinkler App https://community.smartthings.com/t/smart-sprinkler-system/3076
I would like to pull in each valve to webcore so I can control them but all I can pull in is the complete device. Anyone doing this now?

2) What is the expected behavior?
(PUT YOUR INFO HERE)

3) What is happening/not happening?
(PUT YOUR INFO HERE)

4) Post a Green Snapshot of the pistonimage
(UPLOAD YOUR IMAGE HERE)

5) Attach any logs (From ST IDE and by turning logging level to Full)
(PASTE YOUR LOGS HERE BETWEEN THE MARKS THEN HIGHLIGHT ALL OF THE LOGS SND CLICK ON THE </> ICON TO FORMAT THEM)

REMOVE BELOW AFTER READING
If a solution is found for your question then please mark the post as the solution.

#2

What does the device status look like in the IDE?

#3

image
image.png1920×1152 260 KB

#4

Looks like nothing about the valves is exposed for use.

#5

Yea I saw that. I have my own weather station now and I am going to try to integrate the Ambient API and try to get someone to help me do so. I have a couple of messages out there waiting for a little help. Using the https://community.smartthings.com/t/release-2-7-2019-ambient-weather-station-integration-of-a-network-connected-ambient-weather-station/145788, and seeing if there is a way to pull data off that and get it integrated in the smart sprinkler. No to familiar with the code part so…trying to get a little help.

#6

Found a work around. There is a Virtual Valve that you can control all the different valves so I will just build an application around them.